How to measure?
-
Shoes Size Chart
Important Notice:
- The shoes armor covers outside of your normal shoes.
- You only need to use the shoes size you usually wear to find whether you need a 'small', a 'middle', a 'large', or an 'extra large' shoes armor.
Size EU US CA UK AU MX JP Foot Length Foot Girth inch cm inch cm S <=37 37 5.5 5.5 5 - 23.5 9.06 23 8.66 22 38 6 6 5.5 25 24 9.25 23.5 8.86 22.5 39 6.5 - 7.0 6.5 - 7.0 6 - 6.5 - 24.5 9.45-9.65 24 - 24.5 9.06 23 M 40 7.5 7.5 7 26 25-25.5 9.84 25 9.25 23.5 41 8 8 7.5 27 26 10.04 25.5 9.45 24 42 8.5 8.5 8 8.5 28 26.5-27 10.24 26 9.65 24.5 L 43 9 - 9.5 9 - 9.5 8.5 - 9 9 29 27.5-28 10.43-10.63 26.5 - 27 9.84 25 44 10 10 9.5 10.5 30 28.5 10.63 27 10.04 25.5 XL 45 10.5 - 11 10.5 - 11 10 - 10.5 11.5 - 29 10.83 27.5 10.24 26 46 11.5 11.5 11.5 12 31 30 11.25 28.6 10.64 27.5 XXL 47 12.5 12.5 12.5 12.5 - 13 32 31 11.5 29.2 11 27.9 >=47 -
How to measure your chest, waist, buttock, thigh circumference?
Important Notice:
- All the measurements required are circumference instead of width.
- Please accurate to one decimal place.
- 1. chest circumference
- 2. waist circumference (omphalion)
- 3. buttock circumference
- 4. thigh circumference
-
How to measure your Hand Size (Middle Finger Length)?
Please measure from the fingertip of your middle finger to the joint peak on the back of your hand.
Notice:- This is a very important measurement, please find the joint peak of your middle finger on the back of your hand before you proceed to measure.
- If you have long nail on your middle finger, you MUST NOT take it into measurement.
- If you do not know how to measure your finger, you can just send us a photo where you put a ruler along side your middle finger and we will measure it for you.
- Please measure to an accuracy of 1 decimal place.
-
How to measure your Head Breadth?
The Iron Man helmet has enough space in depth and height dimension. The only measurement you need to take is your Head Breadth.
Step 1:
Stand against a wall and put two books above the top edge of your ears, move closer the books until they tightly reach your head sides. You need someone else to help you.Step 2:
Notice:
Now you can walk away from the wall but please keep the books unmoved. Measure the distance between the two books to get your head breadth.- If you have thick hair in the side of your head, you NEED to take it into consideration.
- If you wear eye glasses, you NEED NOT to take them into consideration.
- Please measure to an accuracy of 1 decimal place.
You can check the measurement with a paperboard. Simply cut a slot on it with the same width as the measurement result. If you cannot fit into the slot, that means the measurement result is smaller than your actual head breadth. If it feels loose, that means the measurement result is bigger than your actual head breadth. There is no need to add any space to your head breadth.
